E36 5.0 conversion parts

E36 5.0 Engine Mounts (new tube steel design): $119

These engine mounts let you drop the engine in one time, saving countless hours and headaches in your 5.0 V8 conversion.  
- No cutting, hammering, drilling, or welding required
- Uses the existing E36 engine mount holes on the crossmember
- No brake booster or firewall modifications required
- Engine is centered in the car for optimum weight balance
- Places the 5.0 high enough to clear the stock steering rack and engine crossmember
- Places the 5.0 low enough to clear the hood with 5.0 EFI intake
- Places the engine rearward as far as possible
- Clears the steering shaft!
- Allows plenty of room to run exhaust under the mount but above the subframe
- Requires E30 325 (polyurethane mounts recommended, not included, but available from Ireland Engineering or AKG Motorsport)
- Material: beefy tube steel and angle
- This is the 6th generation in redesigning these mounts.  They should be strong enough for any application.
- Finish: Bare steel
moutns   50 mounts
pass side   
Driver's side BMW E36 5.0 V8 motor mount - clears the steering shaft!   

E36 T5 Transmission Crossmember: $99

This transmission mount mates the T5 manual transmission to the E36 chassis without welding, cutting or fabrication.  
- No cutting, hammering, drilling, or welding required
- Low-profile flat plate provides maximum clearance for exhaust
- Uses existing transmission crossmember holes
- To be used with our engine mounts and T5 transmission from 87-95 Ford Mustang 5.0
- Uses stock T5 rubber mount (not included)
- Material: 3/16" steel
- Finish: Bare steel
- Can be used for other transmissions! Large area provided for alternate hole locations.
- Holes provided for exhaust supports

moutns   pass side   drivers side

E36 5.0 Conversion Manual: $69

Our conversion manual shows step-by-step how to perform the 5.0 swap.  Details include:
- Complete list of parts needed, including prices, part numbers, photos, and vendors
- BMW engine removal
- 5.0 Engine/transmission preparation
- Easy wiring instructions
- Power steering details
- Air conditioning details
- Alternator, starting, & charging details
- Exhaust routing
- Driveshaft instructions
- ABS modifications
- Clutch modifications
- Radiator details
- Details and routing for fuel lines, coolant lines, air intake, etc.
- Tips for easy 5.0 power upgrades
- 5.0 maintenance items
- 5.0 troubleshooting and engine codes
- Over 200 pages and 150 high-resolution photos
cd



E36V8.com is home of the world's first budget BMW V8 conversion.

Our BMW E36 5.0 engine and transmission mounts have been engineered for high quality and low cost.  All parts are 100% American made.

All these parts will save you hundreds of hours and lots of money saved during your conversion.  It comes in PDF form on a CD-ROM, featuring over 200 pages and over 150 high-resolution pictures.